Bachelor of Engineering (Product Design) (Honours) | International Student Courses | Swinburne University

Study at Swinburne > Find a course > Bachelor of Engineering (Product Design) (Honours)

BH-EPD Degree including honours Hawthorn Send me a link to this course

This course has been discontinued - this course is closed for new enrolments, the information on this page is provided for continuing students.

Search for available courses.

Product design engineers have a unique skill set that enables them to design innovative, sustainable products. The Bachelor of Engineering (Product Design) (Honours) combines studies in industrial design and engineering, linking the creativity and human-centred approach of industrial design with the academic rigour of engineering science, material and manufacturing process selection, project management and innovation. Students develop skills needed to design and develop competitive products for Australian and international markets.

Practical workshops and industry projects are key features of the course. Students may choose a minor specialisation in manufacturing engineering, biomedical engineering or electronic engineering. Students apply their learning in a professionally focused, multidisciplinary project during their final year of study. They also undertake at least 12 weeks of relevant work experience and can choose to complete postgraduate-level elective units.

Every international student application is considered for a scholarship
Whether you’re living in Australia or overseas, you’re automatically considered for a scholarship of up to 20% off your course fees. Please check our updated entry requirements.

This course has been replaced by the Bachelor of Engineering (Honours).

Start dates

Hawthorn campus

HE Block 5 - 13 July 2020
HE Block 5 - 13 July 2020

View application and start dates

Duration

4 years full-time

Full-time

VTAC codes

3400234121 (CSP)
3400234123 (IFP)

CRICOS code

080209J

Fees

A$29450 (annual for 2016)*

The indicative course fees shown in Course Search apply to international students for the relevant year only. They are based on a standard study load per year. However, please note that fees are assessed according to a student's study load in each semester, and variation to study load will result in an adjustment to tuition fees. All fees are subject to annual review and may be adjusted.

International students in Australia who hold student visas are required to study full-time and on campus. Courses that are taught entirely online are only available to international students studying outside Australia or those in Australia who are not on a student visa. Online courses are not available to international students in Australia who hold a student visa.

Product Design Engineering at Swinburne

Explore the design and development of innovative, sustainable products with a Swinburne product design engineering degree. Learn how you can bring your ideas to life through this unique combination of industrial design and engineering.

Student work

Stephen Pedulla
Solar Ranger: Professional project
Philip Grijalvo
Ready Bed: Professional project
Natasha McCurdy
Aura – Portable baby bottle steriliser: Professional project
Gareth Montgomery
Street Smart – Bike ID: Professional project
Ellessandra Verhey
Food to Grow: Professional project
Clint Graham
Disappearing Bed: Professional project
Jareth Kelaart
Bubsaver: Professional project
Alexander Baer
Hybrid Buddy: Professional project

Course details

- Course structure, work integrated learning, career opportunities and professional recognition.

Course structure

Successful completion of the Bachelor of Engineering (Product Design) (Honours) requires students to complete units of study to the value of 400 credit points. All units of study are valued at 12.5 credit points unless otherwise stated.
View course rules and special requirements

Core studies

28 units (350 credit points)

Units	Unit codes	Credit points
User Centred/Co-Design Studio - Prev - DPD10002	DID10004	12.5
Product Design Studio 1	DPD10001	12.5
Product Design Studio 2	DPD10003	12.5
Engineering Materials	ENG10002	12.5
Mechanics of Structures	ENG10003	12.5
Calculus and Applications	MTH10012	12.5
Linear Algebra and Applications	MTH10013	12.5
Energy and Motion	PHY10001	12.5
Electronics and Electromagnetism	PHY10004	12.5
Product CAD	DPD20001	12.5
Product Design Engineering Studio	DPD20002	12.5
Sustainable Product Design	DPD20003	12.5
Professional Experience in Engineering	EAT20008	0
Structural Mechanics	MEE20004	12.5
Materials and Manufacturing 1	MEE20005	12.5
Machine Dynamics 1	MEE20006	12.5
Thermofluid Systems	PDE20001	12.5
Advanced Product Design ^†	DPD30001	12.5
Design For Social Responsibility ^†	DPD30002	12.5
Machine Design ^†	MEE30003	12.5
Engineering Management 1 ^†	MME30001	12.5
Global Design ^†	DPD40002	12.5
Professional Design Attributes *^†	DPD40004	12.5
Mechanical Systems Design *^†	MEE40002	12.5
Human Factors *^†	MEE40005	12.5
Engineering Management 2 ^†	MME40001	12.5
Design for Manufacture *^†	PDE40001	12.5
Professional Project 1 (PDE) *^†	PDE40002	12.5
Professional Project 2 (PDE) *^†	PDE40003	12.5

*Outcome unit – completion demonstrates the attainment of course learning outcomes

^†Honours merit unit – results are used in the honours merit calculation

Other studies

4 units (50 credit points)

Choose from a combination of the following course components to complete 50 credit points of other study. Students may also select elective units (12.5 credit points each).

– Work Integrated Learning + Elective units + Signature Series

Work Integrated Learning

Swinburne's Work Integrated Learning program provides additional opportunities for you to gain valuable skills and real industry experience in the form of placements, internships or study tours - all while earning credit towards your degree.

Choose a Work Integrated Learning option:

You'll get paid to work in an area related to your field of study for 12 months, where you'll combine hands-on learning with academic submissions, workplace reflection and feedback from your host organisation. Most students undertake their placements in the third year of their degree, so you’ll want to map out your electives as soon as you can and register for a placement at least 6 months before your preferred start date.

The Professional Placement co-major has four 25 credit point units.

Warning: Invalid argument supplied for foreach() in /vhost/www.swinburne.edu.au/cwis/php_pages/webapps/marketing/coursesearch-v2/system/ui/detailpage/elements/course-ug-main/work-integrated-learning.php on line 33

You'll get paid to work in an area related to your field of study for 6 months, where you'll combine hands-on learning with academic submissions, workplace reflection and feedback from your host organisation. Most students undertake their placements in the third year of their degree, so you’ll want to map out your electives as soon as you can and register for a placement at least 6 months before your preferred start date.

The Professional Placement minor has two 25 credit point units.

A Professional Internship is all about gaining valuable real-world skills in your area of study all while earning credit points towards your degree. Plus, it looks great on your CV as it shows you’ve had real industry experience before you’ve even graduated!

You might choose to complete your internship part-time over a semester or in a more intensive block during Summer or Winter terms.

Travel overseas, discover other cultures, enrich your professional experience and enhance your CV all while gaining credit towards your course.

Elective units

Any of the following units may be undertaken.

Units	Unit codes	Credit points
Introduction to Programming	COS10009	12.5
Fundamentals of Marketing	MKT10007	12.5
Contemporary Design Issues	DDD20004	12.5
Managing Design	DDD20005	12.5
Digital Electronics Design	EEE20001	12.5
Embedded Microcontrollers	EEE20003	12.5
Circuits and Electronics 1	EEE20006	12.5
Engineering Design Academy	ENG30001	12.5
Materials and Manufacturing 2	MEE30001	12.5
Integrated Circuit Design	EEE40002	12.5
Robot System Design	RME40003	12.5
Robotics in Manufacturing	ADM80011	12.5
Technology Management	ADM80012	12.5
Advanced Manufacturing Processes 1	ADM80013	12.5
Computer Modelling, Analysis and Visualisation	ADM80015	12.5

Signature Series

A Swinburne education prepares you for life. That’s why we’ve developed the Swinburne Signature Series. It’s a suite of study opportunities that embody Swinburne’s ethos – of confidence, clarity and adventure. These opportunities give our students something extra; whether that’s a new perspective on the world through a Study Tour unit, an expanded sense of possibilities through our Innovation Minor, or a deeper understanding and respect for culture through our Indigenous Minor. Like Swinburne University itself, our Signature Series will grow and adapt to reflect the evolving issues of the day.

Full-time study: 100 credit points/eight standard units of study per year
Part-time study: 50 credit points/four standard units of study per year
One credit point is equivalent to one hour of study per week per semester (including contact hours and private study)
See the course planner for an example degree structure

Honours

Honours merit calculation

Honours merit calculation will be based on the averaged results of 12 units in the final two years of the course with the following descriptive outcomes:

BEng (Product Design) (Hons) with High Distinction; for students who achieve ≥ 80
BEng (Product Design) (Hons) with Distinction; for students who achieve 70 – 79
BEng (Product Design) (Hons) with Credit; for students who achieve 60 – 69
BEng (Product Design) (Hons); for students who achieve < 60

Students who transfer with advanced standing are required to undertake at least nine of these units at Swinburne, including all six Advanced Engineering units, to qualify for an honours merit calculation. This honours merit calculation will be based only on units completed at Swinburne. If a student has not completed at least nine of the specified units, they will graduate with a BEng (Product Design) (Hons) as an award title, but not be eligible for a merit based honours description.

Course learning outcomes

Students who successfully complete this course will be able to:

Apply coherent and advanced knowledge of product design engineering in diverse contexts and applications using critical thinking and judgement.
Apply knowledge of research principles and methods to plan and execute a piece of research with some independence, as preparation for research higher degrees.
Apply problem solving, design and decision-making methodologies to identify and provide innovative solutions to complex problems with intellectual independence.
Apply abstraction, mathematics and product design engineering fundamentals to the analysis, design and operation of a model, using appropriate engineering methods and tools.
Communicate proficiently in professional practice to a variety of audiences, function as an effective member or leader of a diverse team, and use the basic tools and practices of project management within project work.
Demonstrate professionalism, integrity, ethical conduct, professional accountability and an awareness of professional engineering practice in a global and sustainable context.
Reflect on and take responsibility for their own learning and self-management processes, and manage their own time and processes effectively by regularly reviewing of personal performance as a means of managing continuing professional development and lifelong learning.

Career opportunities

Graduates may find employment in industries dealing in the design, development and manufacture of domestic products or the automobile industry. Their role will be primarily in the area of design, innovation, project management and manufacturing.

Professional recognition

Graduates are eligible to apply for graduate membership of the Institution of Engineers Australia and the Design Institute of Australia.

How to enter this course

- Entry requirements, English language requirements and prerequisites.

Entry requirements

A prerequisite for many courses, the Pearson Test of English Academic (PTE Academic) can now be done on campus in Hawthorn at Room 132, Building TD. Book now or call +61 3 9214 3584 for more information.

Assess your eligibility for entry to Swinburne.

Prerequisites

Completion of Australian Year 12 or equivalent.
- Advanced Mathematics
  Note that Advanced Mathematics studies must be equivalent to the Year 12 Advanced Mathematics subjects: VCE Mathematical Methods 3 and 4, that include topics in coordinate geometry, circular (trigonometric) functions, calculus, algebra, statistics and probability.

English language requirements

Satisfactory completion of Swinburne’s English for Academic Purposes (EAP 5 Advanced level) with overall 70%, all skills 65%; OR, obtaining a minimum IELTS overall band of 6.5 (Academic Module) with no individual band below 6.0; OR, a TOEFL iBT (internet-based) minimum score of 79 with no band less than 18; OR, Pearson (PTE) 58 (no communicative skills less than 50); OR, equivalent. Find out more about English language requirements.

Pathways

Pathways allow students to progress from one qualification to another where the first course is recognised as an entry requirement and/or provides advanced standing to the second.

Learn more about pathways.

How to apply

This course is closed for new enrolments.